Application Instructions, Shipping & Fonts

Our labels are super durable. However users need to follow instructions given below. Should you have any issues applying your labels please contact us immediately so we can resolve the issue. We are here to help!

1. Peel and stick to clean, dry and smooth surfaces.
2. Our labels adhere well to hard surfaces like glass, smooth plastic, and metal.
3. They don’t adhere well to textured plastics or plastics with an indentation or overly curved surfaces.  Smooth and flat is best.
4. Our labels don’t adhere well to plastics with a lot of flexibility or movement such as squeezy drink bottles or collapsible lunch boxes.  The flexi-movement of these plastics causes the adhesive to crack creating air bubbles and therefore causing the labels to peel.
5. Our labels are removable but not reusable. Please ensure you have the positioning correct before you place your label.
6. Please ensure the labels are left on for 24 hours after application, before using or washing them for maximum adhesion and durability.

1. The product is meant for clothing/wash care tags only (satin/synthetic material)and is not guaranteed if applied directly to clothing or fabric i.e cotton/wool.
2. Not suitable for socks, since socks do not have wash care tags.
3. Please ensure the labels are left on for 24 hours after application, before using or washing them for maximum adhesion and durability.

1. Peel and stick to dry insoles of smooth surface footwear.
2. Works best if the labels are stuck to the end of the shoe, corresponding to the heel.
3. Please ensure the labels are left on for 24 hours after application before use, for maximum adhesion and durability.

1. Iron On labels can be applied to any part of the garment.
2. Ensure labels adhered to smooth parts of the garments i.e. they are NOT applied where garments have folds/ pleats or is gathered due to elastic bands.

1. Set iron to Dry mode (no steam) at highest temperature i.e. cotton/linen setting. Make sure the iron is not defective as these labels require high heat of around 200 C.
2. Peel Iron On  label from the sheet and place it on the on fabric.
3. Place the parchment paper (included) over the Iron On label.
4. Place iron over the parchment paper and HOLD iron in place over the label for 30 seconds with medium pressure. DO NOT MOVE THE IRON. DO NOT USE TIP OF THE IRON, USE THE CENTRE BROAD SECTION OF THE IRON
5. Repeat Step 4 for another 30 seconds. Check to ensure the edges have adhered to the fabric. If not, repeat Step 4 as long as it takes until the edges seal to fabric.
6. Please ensure the labels are left on for 24 hours after application, before using or washing them for maximum adhesion and durability.
7. DO NOT APPLY LABELS ON CLOTHING TAGS, APPLY THEM DIRECTLY ON THE FABRIC.

Note: Your parchment paper is reusable. If you lose it, don’t worry, you can use kitchen baking paper or aluminum foil.

Common Problems with Iron On labels:
1. Labels are curling and not adhering to fabric:  Iron is not set to a high temperature OR Iron is faulty and not heating up well. Please try using someone else’s iron
2. Labels are sticking to parchment paper: Iron is not set to a high temperature.
3. Print is smudging on parchment paper. Use an old cotton shirt or something similar between label and iron,

Peeling Labels off the sheet

1. The labels have been cut and should peel of relatively easily off the sheet.
2. To peel the labels bend the sheet till the labels lift off the edges, where they have been cut.  Most labels will lift off easily while some might require additional pressure.  Please call/email us if there are any issues, and we will sort it out.

We offer standard shipping (via NZ Post). For faster delivery methods, please see rates below. Because this is a customised product, please allow 4 business days for processing, in addition to the shipping estimates below.

We are not responsible for lost or delayed post for Standard Shipping as these are not tracked.

We recommend that you use the Tracked Post delivery method to track your order. In addition, if you think your package might be stolen from your letterbox, we would advise using the Signature Option for Courier.  This is because posties will leave the package in your letterbox, unless advised otherwise, in most instances. 

Please select the correct shipping options. We won’t be able to process the order if an incorrect option is selected.

Check out how our fonts print! As these are personalised labels, font size will depend on the text provided with each order.